EndlessWait
05-21 01:18 PM
We all know, Mexican govt. lobbied quite a lot for there ppl. Looks like its a fair course. NRIs serve both interests US and back home. India and US seem to be strong allies now then ever, so perhaps we should ask the Indian govt. to voice our concerns.
Its only fair when illegals can get all the attention, why can't we.
Its only fair when illegals can get all the attention, why can't we.
wallpaper lack and white people
mvsreddy
11-06 05:15 PM
Me too in same boat. At NSC, RD - 7/30, ND - 8/31, PD - 04/2007, EADs rcvd by 10/10 and waiting for APs. No LUDs after FP(9/28) on APs or 485s. LUD still shows 9/5 only. Any idea where is Nebraska now in processing APs???
anukcs
07-18 12:51 PM
I received below email from NPR's Jennifer Ludden who had covered July 2nd issue for us. She wants to talk to somebody who was affected and she is aware that the issue is now resolved. I was not affected since my PD became current in june and my application was reached CIS in june itself. Anybody willing to talk to her, please call her.
Thanks,
EMAIL FROM JENNIFER LUDDEN BELOW
=============================
Thanks for your note about my piece on the green card mess. Now that DHS has reversed itself again I am doing a short follow up for tonight�s program. Were you affected, and would you be willing to speak with me? I need to do this very soon as the show goes on the air in a few hours�
I can call you, or my number is 202 513 2256.
Many thanks,
Jennifer Ludden
Jennifer Ludden
npr
635 Massachusetts Ave., NW
Washington, DC 20001
(202) 513-2256
Thanks,
EMAIL FROM JENNIFER LUDDEN BELOW
=============================
Thanks for your note about my piece on the green card mess. Now that DHS has reversed itself again I am doing a short follow up for tonight�s program. Were you affected, and would you be willing to speak with me? I need to do this very soon as the show goes on the air in a few hours�
I can call you, or my number is 202 513 2256.
Many thanks,
Jennifer Ludden
Jennifer Ludden
npr
635 Massachusetts Ave., NW
Washington, DC 20001
(202) 513-2256
2011 White People
sunnymit
02-17 04:30 PM
Really speaking I care more for the dates to get current so I can add my wife to my GC application and get her an EAD and AP. After that I won't mind if I have to wait for some more time before I get the actual GC in hand
more...
akhilmahajan
09-14 03:56 PM
Hi All,
I think a lof people have the LUD is 08/05/07 for 140 filed in TSC..and everyone takes their guesses. Please post if u r LUD for 140 is 08/05/2007 ;
Any idea what we are trying to achieve here?
If you guys thing i am dumb, you are more then welcome to think that, but i am still confused about the thread.
I think a lof people have the LUD is 08/05/07 for 140 filed in TSC..and everyone takes their guesses. Please post if u r LUD for 140 is 08/05/2007 ;
Any idea what we are trying to achieve here?
If you guys thing i am dumb, you are more then welcome to think that, but i am still confused about the thread.
coolpal
03-30 10:43 AM
If your GC is getting approved today, then your priority date should be current, so I assume you will be (or would have) applied for dependent 485 for your wife (and son?) so they are going to be on AOS...
..or, am I missing something?
pal :)
..or, am I missing something?
pal :)
more...
gneerajg
07-27 02:03 AM
Hi,
I have already filed my I-140 and 485 in May 2007 and my extension is due in Sept this year. Am I eligible for 3 yr extension or not and secondly my wife and daughter are using their AP so are they required H-4 extension or not
Neeraj
I have already filed my I-140 and 485 in May 2007 and my extension is due in Sept this year. Am I eligible for 3 yr extension or not and secondly my wife and daughter are using their AP so are they required H-4 extension or not
Neeraj
2010 In fact, I love all people.
jonty_11
01-08 01:18 PM
If TCS or any Indian firm claims you owe them something since you quit them after coming to US (contract breach or whatever), they will not release your PF until you clear your accounts with them. Call is yours after seeing if the payback is greater than PF??
more...
dixie
05-19 06:10 PM
I doubt we can threaten to get sanctions passed on Exceed .. i dont think we have the political clout for that. All we can do for now is plead, reason and educate senators of the unfair treatment we get from the broken immigration system. If our membership keeps growing to a point where we represent most of the affected legal immigrants at the mercy of USCIS (close to half a million), then its a different story, not to mention if we had the numbers and political clout of the illegals. Just my opinion.
hair he was White, White people
aroranuj
08-20 11:57 PM
I would appreciate it if someone can give me some advise...I need to file my EAD renewal & refuse to pay insane amounts of money to my attorney...
Thanks!!!!
I am filing for my EAD renewal and had a quick question...I have an EAD card from when I was in college and did my OPT. The problem though is that I do not have some of the details that they ask for while filing EAD renewal, such as what Center was it processed at & what was the application date.
I have already called USCIS & they cant pull up what center my EAD was filed at or the date it was filed. Can anyone suggest what I should do in this situation? What do I put in the form? Does anyone have similar experiences?
Thanks!!!!
I am filing for my EAD renewal and had a quick question...I have an EAD card from when I was in college and did my OPT. The problem though is that I do not have some of the details that they ask for while filing EAD renewal, such as what Center was it processed at & what was the application date.
I have already called USCIS & they cant pull up what center my EAD was filed at or the date it was filed. Can anyone suggest what I should do in this situation? What do I put in the form? Does anyone have similar experiences?
more...
kumsoft
07-02 03:04 PM
Dear Follow member,
Our inability to apply for I-485 due to unethical behavior of USCIS is not covered by any major news channel. I searched in google and looked up all major news web site, non has this news. When all these news channels can cover illegal immigrations, why cant they have some space for legal immigration. We are legal immigrants, shouldnt be afraid of anything. We pay a lot of taxes and we dont diserve this 3rd rated treatment. So go call every major news channel in your local area and request them to cover this news. I called Fox10, ABS15 & AZ Republic in Phoenix area. Spread this news and create awareness and we should be able to get justice.
Our inability to apply for I-485 due to unethical behavior of USCIS is not covered by any major news channel. I searched in google and looked up all major news web site, non has this news. When all these news channels can cover illegal immigrations, why cant they have some space for legal immigration. We are legal immigrants, shouldnt be afraid of anything. We pay a lot of taxes and we dont diserve this 3rd rated treatment. So go call every major news channel in your local area and request them to cover this news. I called Fox10, ABS15 & AZ Republic in Phoenix area. Spread this news and create awareness and we should be able to get justice.
hot Black people
satyab7
04-26 03:15 PM
Keep up the good job guys ....
more...
house Politics Break: White People
cubedflash
01-28 10:49 AM
PJ,
Sorry for the delay in the answer. I have never heard of an import staying with your FLA file after being erased. It sounds like there is an error in Flash. I would recommend contacting our support - support@erain.com.
Here are some tips from my friend Rushvision on keeping file size low:
There are a number of different things you can do to decrease the file size of your exported SWF. Here are the some things for you to try.
Scale your objects down in the Scene Editor
Go to the Layout Page on the Properties Toolbar and decrease the scene size. You are working with vectors, so your images will scale back up very nicely once imported into Flash.
Some objects have settings that allow you to change the number of segments used to create it, such as the torus and the sphere. Decreasing the number of segments will reduce the amount of data that needs to be rendered.
Get rid of any unnecessary bevels. These add considerably to the total number of polygons that make up the objects in your scene.
In the Preview and Export Editor under the General Options, you can set the Detail Level to low.
Setting the slider farther over to Curves will usually result in a slightly smaller file size, but don't expect this one to work miracles.
Experiment with the different Fill Settings. There is no one setting that works best for every situation. Try combining outlines with some of the simpler fill settings to get the greatest amount of detail and the smallest file size. It will often be a compromise on some level.
__________________
mrush
Good luck!
-cubedflash
Sorry for the delay in the answer. I have never heard of an import staying with your FLA file after being erased. It sounds like there is an error in Flash. I would recommend contacting our support - support@erain.com.
Here are some tips from my friend Rushvision on keeping file size low:
There are a number of different things you can do to decrease the file size of your exported SWF. Here are the some things for you to try.
Scale your objects down in the Scene Editor
Go to the Layout Page on the Properties Toolbar and decrease the scene size. You are working with vectors, so your images will scale back up very nicely once imported into Flash.
Some objects have settings that allow you to change the number of segments used to create it, such as the torus and the sphere. Decreasing the number of segments will reduce the amount of data that needs to be rendered.
Get rid of any unnecessary bevels. These add considerably to the total number of polygons that make up the objects in your scene.
In the Preview and Export Editor under the General Options, you can set the Detail Level to low.
Setting the slider farther over to Curves will usually result in a slightly smaller file size, but don't expect this one to work miracles.
Experiment with the different Fill Settings. There is no one setting that works best for every situation. Try combining outlines with some of the simpler fill settings to get the greatest amount of detail and the smallest file size. It will often be a compromise on some level.
__________________
mrush
Good luck!
-cubedflash
tattoo lack and white pictures
sureshd
07-01 05:34 PM
Hi All,
Company A:
I am on my 7th year of H-1B visa (6th year expired on Apr30th 2008).
Labor approved Dec, 2006.
I-140 applied in June 2007. (Got RFE regarding my Educational Transcripts
which we responded in time and USCIS received on Dec 5, 2007)
I-485 applied in Sep 2007
Got EID and Advance parole approved.
I-140 Denied on Apr 3 2008.
Applied for MTR (I-120 B). Now it is at Texas Service center (since May1, 2008).
Company B:
Now this company applied for my Labor (Perm) on Apr 21, 2008.
Got Approved on June 24, 2008.
1. Do I Eligible for Premium Processing of I-140?
2. If iam not eligible for Premium Processing, still do I eligible for 8th year extension based on my Labor applied on Apr21, 2008 (365 days before my 7th year H1B expiry)? Even when company A withdraws my MTR.
Please advice.
Thanks
Company A:
I am on my 7th year of H-1B visa (6th year expired on Apr30th 2008).
Labor approved Dec, 2006.
I-140 applied in June 2007. (Got RFE regarding my Educational Transcripts
which we responded in time and USCIS received on Dec 5, 2007)
I-485 applied in Sep 2007
Got EID and Advance parole approved.
I-140 Denied on Apr 3 2008.
Applied for MTR (I-120 B). Now it is at Texas Service center (since May1, 2008).
Company B:
Now this company applied for my Labor (Perm) on Apr 21, 2008.
Got Approved on June 24, 2008.
1. Do I Eligible for Premium Processing of I-140?
2. If iam not eligible for Premium Processing, still do I eligible for 8th year extension based on my Labor applied on Apr21, 2008 (365 days before my 7th year H1B expiry)? Even when company A withdraws my MTR.
Please advice.
Thanks
more...
pictures lack and white photos of
sapking
12-14 11:13 PM
What did your attorney say?
dresses Arte - Black and White Sketch
pappu
05-27 09:41 AM
Please do not put fake data in your profile.
Please input real data if you would like others to respond to you and spend time on your post. If you have not started your greencard process, please keep all fields empty.
Thank you
Please input real data if you would like others to respond to you and spend time on your post. If you have not started your greencard process, please keep all fields empty.
Thank you
more...
makeup People i love and trust
ujjvalkoul
08-21 10:39 AM
Can moderators setup Web Fax for this?
girlfriend dresses BLACK WHITE
s_r_e_e
08-20 10:42 AM
Hats off to you guys.
hairstyles People amp; Ocean Black amp; White
kk_2000
11-06 08:54 PM
Hi,
We are in a critical situation. My wife's AP was approved on 10/18 and the current status is "Document Mailed on 11/05". It also says "You should receive the document within 30 days".
Our flight to India is on 11/15 and we are wondering typically how long it takes for us to receive the physical paper after the status changed to "Document Mailed".
Can you please share your experience?
Thanks,
KK
We are in a critical situation. My wife's AP was approved on 10/18 and the current status is "Document Mailed on 11/05". It also says "You should receive the document within 30 days".
Our flight to India is on 11/15 and we are wondering typically how long it takes for us to receive the physical paper after the status changed to "Document Mailed".
Can you please share your experience?
Thanks,
KK
eb3retro
07-11 05:16 PM
Hello All,
Just received in mail - 2 Year EAD card for me and my wife. Valid till July 2010. I have e-filed myself for both of us. Still waiting for AP docs.
hi saint, nothing against you, i wonder what is the freakin logic USCIS uses to decide on 2 year EAD approval, here i am with pd not being current for atleast next 2-3 years (given the halt of eb3-I), 2nd ead extn, in my 8th year of h1b, i got a one year EAD extn, where as a eb2 person gets a 1 year validity...i only wish we can know whats going in the minds of these decision makers..
Just received in mail - 2 Year EAD card for me and my wife. Valid till July 2010. I have e-filed myself for both of us. Still waiting for AP docs.
hi saint, nothing against you, i wonder what is the freakin logic USCIS uses to decide on 2 year EAD approval, here i am with pd not being current for atleast next 2-3 years (given the halt of eb3-I), 2nd ead extn, in my 8th year of h1b, i got a one year EAD extn, where as a eb2 person gets a 1 year validity...i only wish we can know whats going in the minds of these decision makers..
darkblue2007
10-13 11:58 AM
I have a close friend who has floated a company to pursue an entrepreneurial dream.
My husband is currently working in US and has filed for GC (140 approved status). I have an EAD and am working in a company very close to where I am staying.
My friend has requested me to help market clients for the product that they are developing.. Is it ok for me to approach companies, as a representative of my friend's company and try selling the product(strictly non-compensational)? Or will there be legal hassles in doing this? Please enlighten me with your thoughts..
Appreciate your help in advance.
I dont understand why you are hesitating to do this. Since you have EAD, you can do volunteer work as long as you wont get paid. There wont be any legal hassles in doing this
My husband is currently working in US and has filed for GC (140 approved status). I have an EAD and am working in a company very close to where I am staying.
My friend has requested me to help market clients for the product that they are developing.. Is it ok for me to approach companies, as a representative of my friend's company and try selling the product(strictly non-compensational)? Or will there be legal hassles in doing this? Please enlighten me with your thoughts..
Appreciate your help in advance.
I dont understand why you are hesitating to do this. Since you have EAD, you can do volunteer work as long as you wont get paid. There wont be any legal hassles in doing this
No comments:
Post a Comment