xsedrinam
Sep 18, 02:06 PM
Send them C.O.D. to AOL.
mif
Mar 23, 03:26 AM
Fine, fine. *envy*
Damn, always playing catch up. When i used wireframes, everyone was using flat shading. When i reached there, everyone was using texture mapped gourauds and phongs. After that was ray-tracing and now when i have implemented it with soft shadows, everyone is using path-tracing and derivatives. And my editor uses steam power. It took years to make.
Feel like Janina. (It's a Pin-Up. Model over 18 and in Finland pigtails no toddler make)
Trucks
Damn, always playing catch up. When i used wireframes, everyone was using flat shading. When i reached there, everyone was using texture mapped gourauds and phongs. After that was ray-tracing and now when i have implemented it with soft shadows, everyone is using path-tracing and derivatives. And my editor uses steam power. It took years to make.
Feel like Janina. (It's a Pin-Up. Model over 18 and in Finland pigtails no toddler make)
Trucks
CorporateFelon
May 2, 02:45 PM
I've recently installed a 2.33ghz c2d chip in my old 1.66 cd mac mini. The performance boost has been great!
I've noticed temps have gotten a little high while running encodes and such... around low - mid 90s C while handbrake is encoding. I know this is still within operating temperature, but i'd like them to be a little lower.
I managed to keep the plastic clips from breaking while installing my cpu. I've been thinking about replacing the nylon clips with some nylon screws, like others have mentioned.
My question, Do people use the springs that came with the clips when installing the screws? Or do people just screw the heatsink down snug to the cpu without the springs?
Thanks,
Would any OEM C2D chip work?
I've noticed temps have gotten a little high while running encodes and such... around low - mid 90s C while handbrake is encoding. I know this is still within operating temperature, but i'd like them to be a little lower.
I managed to keep the plastic clips from breaking while installing my cpu. I've been thinking about replacing the nylon clips with some nylon screws, like others have mentioned.
My question, Do people use the springs that came with the clips when installing the screws? Or do people just screw the heatsink down snug to the cpu without the springs?
Thanks,
Would any OEM C2D chip work?
The.316
Dec 24, 03:35 PM
http://www.catfacts.org/cat-facts.jpg
And no, not a cat, per say :D
And no, not a cat, per say :D
more...
jav6454
Mar 31, 12:21 PM
Fox News looses viewers? I am not surprised...
>mon visage
>mon visage
mkrishnan
Dec 23, 05:32 PM
I'm having this problem with my relatively new (3 months) iBook. After it's been woken from sleep mode, the keyboard won't work for a minute or so. It'll work if the iBook's been open during sleep mode and I wake it up using the keyboard, but if I wake it from being closed or I wake it with the mouse, the keyboard doesn't function for a short period of time. Help?
Couple questions...during this time, does the mouse work? When you say "minute," do you mean 5-8 seconds, or do you really mean a minute?
My iBook takes about that much time (5-8 seconds) to get an Airport connection, and during that time, the mouse and keyboard are both initially non-responsive.... And I think that's normal. But I'm not sure if that's what you're describing.
Couple questions...during this time, does the mouse work? When you say "minute," do you mean 5-8 seconds, or do you really mean a minute?
My iBook takes about that much time (5-8 seconds) to get an Airport connection, and during that time, the mouse and keyboard are both initially non-responsive.... And I think that's normal. But I'm not sure if that's what you're describing.
more...
zmulleni
Apr 22, 10:19 PM
I thought you could JB the iPhone and then use an app called MiFi (or somethinlg) and create a hot spot that the iPad (1st or 2nd Gen) could use.
I am losing my work provided cellphone and i was thinking about an iPhone for doing just that.
Correct, pay a one time fee of $20 or $25 for My-Wi on demand. My-Wi on demand automatically creates a wifi hotspot when necessary so you don't have to constantly have to switch on and off. By far one of the best reasons to jailbreak an iDevice.
I am losing my work provided cellphone and i was thinking about an iPhone for doing just that.
Correct, pay a one time fee of $20 or $25 for My-Wi on demand. My-Wi on demand automatically creates a wifi hotspot when necessary so you don't have to constantly have to switch on and off. By far one of the best reasons to jailbreak an iDevice.
designguy79
Feb 11, 08:12 AM
My favorite is SilverStripe. Not as widely used or known, but I love the flexibility it gives me as a developer and it is pretty user-friendly, too.
Side note -- Ruby on Rails is framework, not really a CMS. It would be comparable to Cake, Symfony or Yii (frameworks for PHP).
Side note -- Ruby on Rails is framework, not really a CMS. It would be comparable to Cake, Symfony or Yii (frameworks for PHP).
more...
xbuddycorex
May 4, 06:36 AM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_3_2 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8H7 Safari/6533.18.5)
Take it to the Apple Store and explain it to them, maybe they can do something.
Take it to the Apple Store and explain it to them, maybe they can do something.
Night Spring
Apr 5, 12:47 AM
Out of curiosity, why did you use a third party charger? I've done it a few times with other devices, but it's always been with quality, branded chargers (like charging my Kindle with my BlackBerry's charger), but I wouldn't dare do that with my iPad unless I knew it was top quality since so many of those third party chargers, like third party batteries, can damage your equipment.
By the way, I think using a third party charger may have voided your warranty anyway. At least on some devices I'm pretty sure it does.
No way third party chargers void warranty, if it did, we wouldn't have a single Apple device left with any warranty. :eek:
Anyway, OP is in luck, as 4.3.1 JB just came out. So he can just restore to that and see if that fixes his problem.
By the way, I think using a third party charger may have voided your warranty anyway. At least on some devices I'm pretty sure it does.
No way third party chargers void warranty, if it did, we wouldn't have a single Apple device left with any warranty. :eek:
Anyway, OP is in luck, as 4.3.1 JB just came out. So he can just restore to that and see if that fixes his problem.
more...
.jpg "miley cyrus hairstyles.")
gpzjock
Apr 26, 05:51 AM
I use this stuff, it is good and the lifetime warranty is international:
http://www.memoryamerica.com/2fk225672800at.html �136 + postage 4x2gb.
or http://www.memoryamerica.com/fk251272800a.html �174 + postage 2x4gb.
They posted 2 sets to me at $32 postage each. 16GB for the price of 8GB in the UK back in 2008 when I bought it.
http://www.memoryamerica.com/2fk225672800at.html �136 + postage 4x2gb.
or http://www.memoryamerica.com/fk251272800a.html �174 + postage 2x4gb.
They posted 2 sets to me at $32 postage each. 16GB for the price of 8GB in the UK back in 2008 when I bought it.
BornAgainMac
Jan 7, 11:59 AM
Most people don't really need to have this feature. Michael Jackson probably uses FileVault. :eek:
more...
kjellhar
Dec 9, 02:45 PM
If it is a software problem (which I also suspect), it should be possible to make it disappear by installing linux and tweeking the video settings. It may also be a firmware issue, and it won't be fixed until Apple address the problem.
So, has anyone tried the new PB with Linux??
Personally I don't see it as a problem. I have to get as close as 15cm from the screen to actually see the effect. I know that would give me a headache, lines or not :)
So, has anyone tried the new PB with Linux??
Personally I don't see it as a problem. I have to get as close as 15cm from the screen to actually see the effect. I know that would give me a headache, lines or not :)
LimeiBook86
Dec 15, 03:31 PM
Have 2 cards to choose from:
ATI Mac Edition 7000 PCI for $40
ATI Mac Edition 9200 PCI for $80
Both mint and tested (receipt for warranty available as well I believe but would have to dig through files).
Sorry, like I said before ^^ I need a low end card, probably like a ATI Rage that I just need to display video, no gaming.
ATI Mac Edition 7000 PCI for $40
ATI Mac Edition 9200 PCI for $80
Both mint and tested (receipt for warranty available as well I believe but would have to dig through files).
Sorry, like I said before ^^ I need a low end card, probably like a ATI Rage that I just need to display video, no gaming.
more...
skinticket
Jun 28, 11:14 AM
i agree that there will be a line and there will be camping out. also, i forget where i saw this, but apparently they are getting two shipments in throughout the day. i'll be at one waiting with my friend so he can get his. any idea if they will have bumpers there?
iFiend
May 4, 02:24 PM
Calibrating your battery is just that. It will not improve battery life, it will only make you percentage more accurate.
Play with your settings, restore as new or take it in for a checkup. Those are your options.
Play with your settings, restore as new or take it in for a checkup. Those are your options.
more...
TimothyJarman
Apr 20, 02:51 PM
its worth �0.59 :) im happy. But to be fair if it was not for the promotion price i woudl of never have brought it, so well done guys.
PMB
Mar 13, 10:52 AM
i would put down like 100-150. becouse of the hastle / possibility of having to pay for it to be fixed.
xUKHCx
Mar 3, 08:56 AM
Pretty harsh suggested response don't you think. In general it is relatively trivial for the mods to change a thread title, so if you think it is a problem then please report it and then we can assess the situation.
I don't see it all too often so am not sure that it is such a widespread problem that it needs to be written in to the rules
I don't see it all too often so am not sure that it is such a widespread problem that it needs to be written in to the rules
Newfiebill
Feb 23, 07:36 AM
I done the switch to SSD last night in the Mac Mini. I used the Intel X25-M SATA 80GB SSD and used Carbon Copy Cloner to Clone the New and old drives.
claud9999
Aug 3, 11:40 AM
YESS!!!!!!!!!!!!!!!
E-PL1 support finally. :D
Agreed. I've been using the "Olympus Master 2" software with my E-PL1's RAW files and it's ssssslllllooooowwwww (like 20s to display a pic in 1:1 resolution). Wondering if iPhoto's RAW handling is significantly faster than the Olympus s/w.
Been holding off on upgrading from iPhoto '08 -> '09 in the hopes that '10 will come out soon....................soon?
E-PL1 support finally. :D
Agreed. I've been using the "Olympus Master 2" software with my E-PL1's RAW files and it's ssssslllllooooowwwww (like 20s to display a pic in 1:1 resolution). Wondering if iPhoto's RAW handling is significantly faster than the Olympus s/w.
Been holding off on upgrading from iPhoto '08 -> '09 in the hopes that '10 will come out soon....................soon?
Cox Orange
Apr 15, 01:39 PM
Thanks to both of you.
to get your VHS source onto your computer it would have to be digitized first. So either you digitized the video or someone did it for you. How this was done determines the base quality of your DIGITAL source. It can't be better than your source, but it can be converted to a more useful or less useful digital format (h.264 = more / mpeg2 = less for example).
Ah, I'm stupid. Actually I knew this, do not know how I forgot it when explaining what I am asking. I forgot that I know, that it is the hooked up hardware that changes the source from analogue to digital. Why else should I use this type of thing here called "A/D-converter". (Btw, the A/D-converter I am using is ADVC-300 via firewire and some times EyeTV250 via USB).
I can't explain to myself why I mixed up the hardware's job with what the software does. :o:confused:
it seems your asking how imovie handles video import for various versions.
Yes, that's it.
...but i can tell your quoting some rather old versions ...
I am using Vers. 3 and 5, because I have two PPC-Macs, that I possess for a long time, but never had any need to use iMovie before. I use my Macs 5-6 years (from the day on they were bought). The next buy (first Intel) is actually due, but I am still procrastinating it, but decided to start saving my VHS to an external disk better now then later and so I use my PPC-Macs with the old versions of iMovie they came with.
Noise filtering would be a filter...that's a post process.... - in the software not the hardware, ok.
Have no idea what a "line time base" is.
ah, baseline time correction was the word I was searching for. ADVC uses TBC, EyeTV not. I thought Maybe iMovie does this too, on the fly.
In iMovieHD 5 you can choose that it saves the incoming material as mpeg4. I do not mean the converting to mpeg4 or whatever type after editing (chopping parts in between and all that stuff).
I thought the ADVC-300 changes the analogue one to DV and iMovie puts it in mpeg4.
After that I would cut/edit the film and convert it to h.264.
I choose to let iMovie5 record as DV, because I could not see the sense in capturing it as mpeg4, when I plan to convert it to h.264 afterwords.
If you've got your VCR hooked up to a DV camcorder and the DV camcorder attached to your Mac via Firewire, you can think of capturing it in iMovie as a file transfer. The camcorder is encoding the VCR's output to standard PAL DV, and your Mac is just recording that data.
If you try to do any colour correction or what have you in iMovie, a different engine in different versions might result in different quality. But these versions are so old I don't think you'll find much comparison online — probably best to just suck it and see.
Ok, thanks.
I am assuming this now, (right?): If I plan to save the films on an external disk and convert them to h.264 later, it does not affect the quality, if I use DV coming from iMovie2 or 5.
Example:
1. capture VHS in iMovie
2. save them to disk
3. forget about them
4. buy an Intel-Mac at the end of the year (because I do not want my PPC spend nights with converting DV to h.264
5. open DV file on external disk in mpegstreamclip(converter-app) on new Intel Mac, choose "convert to h.264", setting bitrate and everything I like.
It does not matter if iMovie2 saved it as DV or iMovie5 saved it as DV, right?
PS: I know, me using an ADVC-300 after my questions, sounds like a kid with one guitar lesson playing a Gibson guitar. :)
to get your VHS source onto your computer it would have to be digitized first. So either you digitized the video or someone did it for you. How this was done determines the base quality of your DIGITAL source. It can't be better than your source, but it can be converted to a more useful or less useful digital format (h.264 = more / mpeg2 = less for example).
Ah, I'm stupid. Actually I knew this, do not know how I forgot it when explaining what I am asking. I forgot that I know, that it is the hooked up hardware that changes the source from analogue to digital. Why else should I use this type of thing here called "A/D-converter". (Btw, the A/D-converter I am using is ADVC-300 via firewire and some times EyeTV250 via USB).
I can't explain to myself why I mixed up the hardware's job with what the software does. :o:confused:
it seems your asking how imovie handles video import for various versions.
Yes, that's it.
...but i can tell your quoting some rather old versions ...
I am using Vers. 3 and 5, because I have two PPC-Macs, that I possess for a long time, but never had any need to use iMovie before. I use my Macs 5-6 years (from the day on they were bought). The next buy (first Intel) is actually due, but I am still procrastinating it, but decided to start saving my VHS to an external disk better now then later and so I use my PPC-Macs with the old versions of iMovie they came with.
Noise filtering would be a filter...that's a post process.... - in the software not the hardware, ok.
Have no idea what a "line time base" is.
ah, baseline time correction was the word I was searching for. ADVC uses TBC, EyeTV not. I thought Maybe iMovie does this too, on the fly.
In iMovieHD 5 you can choose that it saves the incoming material as mpeg4. I do not mean the converting to mpeg4 or whatever type after editing (chopping parts in between and all that stuff).
I thought the ADVC-300 changes the analogue one to DV and iMovie puts it in mpeg4.
After that I would cut/edit the film and convert it to h.264.
I choose to let iMovie5 record as DV, because I could not see the sense in capturing it as mpeg4, when I plan to convert it to h.264 afterwords.
If you've got your VCR hooked up to a DV camcorder and the DV camcorder attached to your Mac via Firewire, you can think of capturing it in iMovie as a file transfer. The camcorder is encoding the VCR's output to standard PAL DV, and your Mac is just recording that data.
If you try to do any colour correction or what have you in iMovie, a different engine in different versions might result in different quality. But these versions are so old I don't think you'll find much comparison online — probably best to just suck it and see.
Ok, thanks.
I am assuming this now, (right?): If I plan to save the films on an external disk and convert them to h.264 later, it does not affect the quality, if I use DV coming from iMovie2 or 5.
Example:
1. capture VHS in iMovie
2. save them to disk
3. forget about them
4. buy an Intel-Mac at the end of the year (because I do not want my PPC spend nights with converting DV to h.264
5. open DV file on external disk in mpegstreamclip(converter-app) on new Intel Mac, choose "convert to h.264", setting bitrate and everything I like.
It does not matter if iMovie2 saved it as DV or iMovie5 saved it as DV, right?
PS: I know, me using an ADVC-300 after my questions, sounds like a kid with one guitar lesson playing a Gibson guitar. :)
harry*333
Jun 19, 01:07 PM
Great job to all participants
Now let the bragging begin
Now let the bragging begin
karl878
May 4, 08:10 PM
(think you meant: com.apple.third_party_32b_kext_keylogger.plist)
See the section headed "Apple Surveying 32-Bit Third-Party Kernel Extensions" at http://blog.slaunchaman.com/
See the section headed "Apple Surveying 32-Bit Third-Party Kernel Extensions" at http://blog.slaunchaman.com/
No comments:
Post a Comment