itickings
Apr 8, 01:12 PM
I seem to be able to receive packets from outside my LAN...
what I do not understand is why I cannot establish a connection with a telnet call...
Pretty simple. You are on your LAN, not the Internet. Use your local IP and it will work fine. If you are connected to the Internet from somewhere outside your LAN, use your router's public IP address.
If you try to connect to your routers public IP address from inside, it won't route back. Some routers can be configured to do that, but most can't.
Since your firewall appears to be correctly opened, the problem is either that you're trying from within the LAN, or there is another firewall between the computer running telnet and your router that stops the traffic.
what I do not understand is why I cannot establish a connection with a telnet call...
Pretty simple. You are on your LAN, not the Internet. Use your local IP and it will work fine. If you are connected to the Internet from somewhere outside your LAN, use your router's public IP address.
If you try to connect to your routers public IP address from inside, it won't route back. Some routers can be configured to do that, but most can't.
Since your firewall appears to be correctly opened, the problem is either that you're trying from within the LAN, or there is another firewall between the computer running telnet and your router that stops the traffic.
amusiccale
Jun 20, 10:04 AM
I just called the post office and they said ~$8 to 10 US to ship it First Class international, so you can sortof figure that into the price.
[below does not imply anything about fpar above, I thought I'd just be upfront about this since international shipping is being discussed]
Also, for any international lurkers in the thread, I'm not interested in marking the item in a way to dodge customs--you'll have to work that out yourself. I don't know if that applies for First Class International, but I thought I should just say that outright.
[below does not imply anything about fpar above, I thought I'd just be upfront about this since international shipping is being discussed]
Also, for any international lurkers in the thread, I'm not interested in marking the item in a way to dodge customs--you'll have to work that out yourself. I don't know if that applies for First Class International, but I thought I should just say that outright.
bedifferent
Mar 13, 02:29 PM
Wondering if anyone has found the side bar icons and system folders, etc in Lion. In /System/Library/CoreServices/Finder.app/Contents/Resources I found png's for sidebar icons in sizes 16/18/32 (most likely small/medium/large?). I replaced them with custom color icons I created as I hate the grey sidebar icons but it didn't seem to take (I was able to replace a lot of the system icons manually).
Any idea's?
Any idea's?
jefhatfield
Jul 7, 04:44 AM
wow. thanks
btw, kainjow is only id number 190 which is the oldest regular poster i can think of
blakespot is the oldest listed at id number 9
btw, kainjow is only id number 190 which is the oldest regular poster i can think of
blakespot is the oldest listed at id number 9
more...
Brother Michael
Jul 30, 11:29 AM
Truly amazing...I mean I am at a loss for words here...
Mike
Mike
Lacero
Sep 9, 08:32 AM
Next time, Hillary Duff. Got to get the young 'uns while they are still impressionable. Or it might be fun to see her get laughed off stage.
more...
Chupa Chupa
May 5, 06:18 AM
Any of the new iMacs are more than enough. If you look at the top end card they put in the MBP its the same 6750M in the low end iMac. The only difference is the low end iMac has 1/2 the VRAM.
And that is not to put the MBPs down. The 15"ers will serve you well too. The major factors in my mind are, portability vs. extra speed, and ease of repairs. The iMacs are faster and offer more bang for the buck but if the internal HD dies its a PITA to replace yourself. OTOH the MBPs provide less value but replacing an internal drive is just a screwdriver and torxdriver away.
And that is not to put the MBPs down. The 15"ers will serve you well too. The major factors in my mind are, portability vs. extra speed, and ease of repairs. The iMacs are faster and offer more bang for the buck but if the internal HD dies its a PITA to replace yourself. OTOH the MBPs provide less value but replacing an internal drive is just a screwdriver and torxdriver away.
Saad
May 14, 07:55 PM
It appears to be dead. Does anyone know when it will be relaunched?
more...
yellow
Jan 10, 01:08 PM
It's dusgusting how much smarter Jeff Han is than I.
AaronMT
Dec 28, 09:38 AM
http://www.newhomesource.com/CMS400/uploadedImages/Builder_Homesite/Images/York/Furnace.jpg
Toronto -11C
Toronto -11C
more...
Clix Pix
Dec 19, 01:56 PM
Seemed like a good idea at the time... I guess I made it too literally (you are the apple in my eyes)
Maybe you could make her pupils small apples?
OTB
Maybe you could make her pupils small apples?
OTB
scem0
Sep 28, 08:32 PM
how so? I'm asking because I'm bored out of my wits, and I want to go dancing.
Asking for everyone's favorite colors would get me no where.
Sounds good njmac, thanks :).
_Emerson
Asking for everyone's favorite colors would get me no where.
Sounds good njmac, thanks :).
_Emerson
more...
Ommid
Apr 25, 10:36 AM
Get it under Edu discount, best saving.
solientblack
Apr 26, 08:32 AM
Hello guys, new poster here. I have nowhere else to go except for the Apple store which I do not want to do just yet.
Last night, I was getting out of my car and I had my iPhone on my lap. Naturally I forgot that it was there and it fell on the floor. I inspected it for damage and didn't see a scratch or anything. I get inside and further inspect the phone and I noticed that it shut off. I tried to turn it on like normal, and then once that did not work, I tried to reboot it (home and power held down together) and that did not work. I also noticed that it fell where the Vibrate On/Off switch was, because of a scratch I could not see outside.
Anyway, I tried charging it via USB and then rebooting it. All that would happen is the Apple screen came up for about 10 seconds tops and it would shut off by itself. I tried charging it via the wall charger and I got a bit farther:
the Apple screen would show up, and go through the normal motions. It told me I needed to plug it into iTunes (which I can't) so I knew I had to have screwed something up. All I am able to do is make an emergency call. The phone says I have No Service, it is the wrong time, it also has an alarm icon near the battery, and the battery itself is saying it is charging from 0%-1%. Once I take it off of the charger it dies right away. I did some research this morning before posting and I found that it could be that the battery had come loose in its fall, or screw came loose, whichever.
Have any of you experienced this before? Have a solution? Anything?
Thanks in advance.
Last night, I was getting out of my car and I had my iPhone on my lap. Naturally I forgot that it was there and it fell on the floor. I inspected it for damage and didn't see a scratch or anything. I get inside and further inspect the phone and I noticed that it shut off. I tried to turn it on like normal, and then once that did not work, I tried to reboot it (home and power held down together) and that did not work. I also noticed that it fell where the Vibrate On/Off switch was, because of a scratch I could not see outside.
Anyway, I tried charging it via USB and then rebooting it. All that would happen is the Apple screen came up for about 10 seconds tops and it would shut off by itself. I tried charging it via the wall charger and I got a bit farther:
the Apple screen would show up, and go through the normal motions. It told me I needed to plug it into iTunes (which I can't) so I knew I had to have screwed something up. All I am able to do is make an emergency call. The phone says I have No Service, it is the wrong time, it also has an alarm icon near the battery, and the battery itself is saying it is charging from 0%-1%. Once I take it off of the charger it dies right away. I did some research this morning before posting and I found that it could be that the battery had come loose in its fall, or screw came loose, whichever.
Have any of you experienced this before? Have a solution? Anything?
Thanks in advance.
more...
absolut_mac
Nov 1, 11:04 PM
I am interested in buying a new multifunction printer/scanner. I've seen a couple of posts talking about printers alone, but not together. The salesman at Best Buy was trying to get me to buy a EPSON Stylus Photo RX600. Has anyone bought and/or used this before?
They just got all spanking brand new computer equipment at the school where my wife works, and the various departments were supplied with multifunction units.
Guess, what? It sure didn't take too long for them to break down and/or malfunction. They never bothered repairing them, they just exchanged them for separates.
They just got all spanking brand new computer equipment at the school where my wife works, and the various departments were supplied with multifunction units.
Guess, what? It sure didn't take too long for them to break down and/or malfunction. They never bothered repairing them, they just exchanged them for separates.
DanMacApple
Dec 29, 06:32 AM
2nd or 3rd iPad?? I still need to purchase my first:D
more...
Bear
Sep 21, 06:49 AM
...
My question for discussion would be: 1) would you consider buying a used LCD monitor off of ebay?
...No! No warranty, no guarantee of condition.
My question for discussion would be: 1) would you consider buying a used LCD monitor off of ebay?
...No! No warranty, no guarantee of condition.
superkrups20056
Apr 1, 01:40 PM
By no problem, do you mean that you feel no difference between 10.6 an 10.7?
Well the cursor is not as fast as in Windows, but it's managable.
It means that the cursor movement is not linear to the mouse movement. Google it and you will see that it's a huge issue for people that want to game on their Macs, especially for Windows switchers that are not used to it. The worst part is that there is no setting in OS X to remove it.
Here are two images that illustrate it (from a 3rd party software that removes the acceleration)
Without this program: http://triq.net/files/gallery/snip2.png With this program: http://triq.net/files/gallery/snip1.png
I am begging Lion to have an option to turn mouse acceleration off. I've tried most of these 3rd party programs, and they don't really help. It really affects how well you can play RTSs and FPSs. Please, Apple, just give up an option like Windows does!
Well the cursor is not as fast as in Windows, but it's managable.
It means that the cursor movement is not linear to the mouse movement. Google it and you will see that it's a huge issue for people that want to game on their Macs, especially for Windows switchers that are not used to it. The worst part is that there is no setting in OS X to remove it.
Here are two images that illustrate it (from a 3rd party software that removes the acceleration)
Without this program: http://triq.net/files/gallery/snip2.png With this program: http://triq.net/files/gallery/snip1.png
I am begging Lion to have an option to turn mouse acceleration off. I've tried most of these 3rd party programs, and they don't really help. It really affects how well you can play RTSs and FPSs. Please, Apple, just give up an option like Windows does!
mkrishnan
Mar 20, 01:52 PM
Yes, that does look very cool. :) Would you please post a pic of how you wrapped the PS printout for the top layer around the rounded corners of the top casing? I didn't understand that. :(
mrkramer
Jan 15, 08:23 AM
Even if you know you want a previous gen, you don't want to buy right before a keynote because prices will usually drop if a new rev comes out.
R94N
Nov 4, 10:35 AM
Quite a nice idea - one of the other forums I visit uses VBulletin software as well and it has the photos.
rgs3
Apr 20, 09:16 AM
I have a Macbook Air 11 Ultimate and I was having issues with 10.6.7 (playing Portal/Netflix) hoping that downgrading to 10.6.6 will help. So I want to reinstall SL and get back to 10.6.6, but trying to do a reinstall with my SL dvd is not working. I get to boot off the DVD with the option key, and it allows me to select the dvd to install, but right after that I get a box saying I have to reboot (in multiple languages).
I get this same result from a SL USB drive or a SL DVD. I lost my USB thumb drive that came with the macbook.
Any suggestions?
I get this same result from a SL USB drive or a SL DVD. I lost my USB thumb drive that came with the macbook.
Any suggestions?
Newfiebill
Feb 23, 07:36 AM
I done the switch to SSD last night in the Mac Mini. I used the Intel X25-M SATA 80GB SSD and used Carbon Copy Cloner to Clone the New and old drives.
The.316
Oct 4, 12:05 AM
I want the wood ones. What are they?
No comments:
Post a Comment