Applejuiced
Apr 29, 07:00 AM
No point.
Fubar1977
Apr 18, 06:05 AM
It's not the number of Megapixels, but the sensor size. Jamming that many MPs into a tiny sensor will not give you a good camera
True.
An 8MP cam with with a better lens will destroy it.
Cameraphones will always be a bit gimped purely because of their size and multifunction nature.
I had the 12MP SE Satio for a couple of months and it was good for a phone but my old 7MP compact camera with a better lens blew it away.
True.
An 8MP cam with with a better lens will destroy it.
Cameraphones will always be a bit gimped purely because of their size and multifunction nature.
I had the 12MP SE Satio for a couple of months and it was good for a phone but my old 7MP compact camera with a better lens blew it away.
ickarumba1
Apr 13, 11:46 PM
None of those hard drives in my opinion. Get a Hitachi 500 GB 7200 rpm drive. Best bang for buck. It's quiet, fast, and reliable. There's a reason apple uses them and Toshiba over WD and Seagate. I've had bad experiences with the whole Scorpio line of hard drives. They were always loud and spun up and down at random intervals causing beachballs.
Thanks for the suggestion. It receives good reviews. However, I cannot find one for a good price. The best prices is $178. This is the problem with living in my country.
The reason why I posted those drives is because they are the only ones with non-exorbitant prices.
Thanks for the suggestion. It receives good reviews. However, I cannot find one for a good price. The best prices is $178. This is the problem with living in my country.
The reason why I posted those drives is because they are the only ones with non-exorbitant prices.
Loopie
Apr 28, 10:32 AM
I have an Emac that turns on, but doesn't start properly; the screen stays black and the fan is working. It used to beep/flash a light a couple of times to indicate what was wrong (unfortunately I don't remember how many times, but sort of remember looking up what it meant - I think it was a motherboard or CPU issue), but the beeping/flashing and chiming stopped.
Has anyone dealt with a similar issue and what was wrong with your Emac?
Has anyone dealt with a similar issue and what was wrong with your Emac?
more...
uNext
Feb 2, 08:36 PM
I think i have somebody that can you help you out.
What would your return policy?
i remeber getting 5 iphones at launch and 3 of them had problems.
2 the touchscreen was dead and one the microphone did not work.
What would your return policy?
i remeber getting 5 iphones at launch and 3 of them had problems.
2 the touchscreen was dead and one the microphone did not work.
-Ken-
Apr 27, 11:43 PM
Strange. SL works on all my stuff without ever crashing, including my Hackintosh.
Have you ever tried a clean reinstall?
Have you ever tried a clean reinstall?
more...
stu.h
Mar 11, 03:49 PM
He cant use the words "We've sold out" as its not gone on sale yet! :p
Where are you in the states? Do you get it in 10 minutes?
I'm jealous, Ive gotta wait 2 weeks - UK (if it doesnt get put back)
:(
Where are you in the states? Do you get it in 10 minutes?
I'm jealous, Ive gotta wait 2 weeks - UK (if it doesnt get put back)
:(
collisos
May 1, 05:00 PM
So I searched the forums and couldn't find any concrete information on this, but what are the rumors for iOS 5? Will it be compatible with the iPhone 4, and is it coming out in June at the conference? What has everyone heard?
more...
pulsewidth947
Mar 20, 01:15 PM
Thanks for your replys.. at nearly �100 for that Dr Bott one, i think i'll give it a miss.
I'll just buy a cheap one just for monitor switching.. i got a ps/2 keyboard and a cheap usb keyboard that i can leave plugged into PC/mini mac. And i'll just swap my m$ optical mouse over :)
its just becoming a pain in the arse swapping the monitor over everytime i wanna play a game or jam in Reason!
I'll just buy a cheap one just for monitor switching.. i got a ps/2 keyboard and a cheap usb keyboard that i can leave plugged into PC/mini mac. And i'll just swap my m$ optical mouse over :)
its just becoming a pain in the arse swapping the monitor over everytime i wanna play a game or jam in Reason!
Mr. Anderson
Oct 20, 03:18 PM
and I might be gone from MR for a while in a few months - so you'll all have a chance to play catchup! :D
Yeah, alpha just dropped out of the top ten.....not that it really means anything....
D
Yeah, alpha just dropped out of the top ten.....not that it really means anything....
D
more...
DustinT
Apr 17, 02:14 PM
It really, really depends on what your platform and application is. NO ONE can give you good advise without knowing those two things. You probably want a consultant to help you design this properly if you aren't an expert.
iCaleb
Sep 14, 06:51 PM
Ok I was down by are pond and I caught this strange thing and put it in a bucket.
And that lump kinda freaked me out.......What the heck is it??
Thanks:)
http://i979.photobucket.com/albums/ae273/CalebDa/100_7089.jpg
And that lump kinda freaked me out.......What the heck is it??
Thanks:)
http://i979.photobucket.com/albums/ae273/CalebDa/100_7089.jpg
more...
TwinCities Dan
Apr 12, 08:43 PM
What's older? The Mac's or the clear phone? :p
lbodnar
Feb 14, 12:07 PM
I want to give a Mac mini away for a couple of days to someone who would want to play with Mac for the first time. Is there a way to return OS X to a state where you find it straight after fresh OS X installation when Mac needs to be taken through registration process, given name, etc.
I want to install all the accompanying software like iLife'05 and apply all the recent OS and iLife updates and then "reset/deauthorise" OS X so that the new user did not have to install apps and download updates the first thing after powering the Mac up and going online.
If you are familiar with what sysprep does to Windows, that's what I am looking for Mac OS X.
I assume the process should include removing all the user accounts, deleting assigned Mac name and kicking in a registration app at startup.
I just hope one does not need to buy OS X server for that!
I want to install all the accompanying software like iLife'05 and apply all the recent OS and iLife updates and then "reset/deauthorise" OS X so that the new user did not have to install apps and download updates the first thing after powering the Mac up and going online.
If you are familiar with what sysprep does to Windows, that's what I am looking for Mac OS X.
I assume the process should include removing all the user accounts, deleting assigned Mac name and kicking in a registration app at startup.
I just hope one does not need to buy OS X server for that!
more...
Eggtastic
Apr 25, 06:39 PM
If you have a computer that you are able to use in the meantime, sell you MBA over craigslist and make due with the other computer until the refresh comes. If you can get a really good price for your current model then obviously you would only be putting very little cash towards the refresh.
If you DONT have a temp. computer to use, then wait until the refresh and see what it has to offer. You can still sell your MBA over craigslist for a little bit less and put it towards the newer refresh.
For your needs you will be fine with your current model. Since it was a gift you can use whatever money you have saved now and pull the trigger for a whole lot less.
People here successfully buy and sell during every refresh or 2 with very little to shell out for price differences. Take care of your mac, do daily research for MBA news, and make the decision.
If you DONT have a temp. computer to use, then wait until the refresh and see what it has to offer. You can still sell your MBA over craigslist for a little bit less and put it towards the newer refresh.
For your needs you will be fine with your current model. Since it was a gift you can use whatever money you have saved now and pull the trigger for a whole lot less.
People here successfully buy and sell during every refresh or 2 with very little to shell out for price differences. Take care of your mac, do daily research for MBA news, and make the decision.
Nermal
Jul 4, 10:28 PM
Just for a quick check, I've got 10.2.6 and have the following Dock and Finder files in my /System/Library/CoreServices:
Finder, 368 bytes, version "Mac OS X Fake Finder 10.0", date 14/7/02, 11:34 PM.
Finder.app, 10 560 787 bytes, version "Mac OS X Finder 10.2.1", date 22/10/02, 11:35 AM.
Dock.app, 585 510 bytes, version "Dock 1.1.1", date 22/10/02, 11:25 AM.
I installed from the 10.2.1 CDs and updated to 10.2.6. Take a look at your files and see if they're the same size and version.
Edit: Just looked at the permissions, all 3 files are set to:
Owner: system
Access: Read & Write
Group: wheel
Access: Read only
Others: Read only
Finder, 368 bytes, version "Mac OS X Fake Finder 10.0", date 14/7/02, 11:34 PM.
Finder.app, 10 560 787 bytes, version "Mac OS X Finder 10.2.1", date 22/10/02, 11:35 AM.
Dock.app, 585 510 bytes, version "Dock 1.1.1", date 22/10/02, 11:25 AM.
I installed from the 10.2.1 CDs and updated to 10.2.6. Take a look at your files and see if they're the same size and version.
Edit: Just looked at the permissions, all 3 files are set to:
Owner: system
Access: Read & Write
Group: wheel
Access: Read only
Others: Read only
more...
mdgm
Feb 14, 08:49 PM
none of them are quite good enough so I am waiting for a 2011 upgrade. THE imac and the mac pro I own are both much much much better for eye tv. they handle sports with no blurring. no mini I have owned was or is as good.
What about if you put a SSD in the Mini? Would that make a difference for EyeTV (I guess probably not if you were using the RAM buffer)?
What about if you put a SSD in the Mini? Would that make a difference for EyeTV (I guess probably not if you were using the RAM buffer)?
BongHits
Sep 17, 07:50 PM
Originally posted by Mac2006
Is the price difference between the dual 1ghz and the 1.25ghz worth $500, why or why not?
depends on what you're doing...dont forget it has twice the L3 cache as the new dual 1 ghz (same L3 cache as old dual 1 ghz) your getting approx. 500 more mhz split between two chips, which in motorola terms is pretty significant. consider it like this...the 1.25 is technically 20% faster than the 1ghz, mhz wise. Factor in the additional L3 cache and you have yourself a beast (though I think a used 1ghz tower with 2mb L3 per chip is the best deal you'll find around)
Is the price difference between the dual 1ghz and the 1.25ghz worth $500, why or why not?
depends on what you're doing...dont forget it has twice the L3 cache as the new dual 1 ghz (same L3 cache as old dual 1 ghz) your getting approx. 500 more mhz split between two chips, which in motorola terms is pretty significant. consider it like this...the 1.25 is technically 20% faster than the 1ghz, mhz wise. Factor in the additional L3 cache and you have yourself a beast (though I think a used 1ghz tower with 2mb L3 per chip is the best deal you'll find around)
Shagrat
Jan 14, 11:22 AM
Sorry, but I'll be checking in on the rumour sites during the show. delayed gratification is one thing, but, i won't be able to wait.
You guys obviously have more self restraint than I!
(Damn, I obviously still have US spelling turned on. It's RUMOURS, Macbook. Geddit???)
You guys obviously have more self restraint than I!
(Damn, I obviously still have US spelling turned on. It's RUMOURS, Macbook. Geddit???)
diond730
Apr 28, 12:29 AM
i have the windows cd but i have no idea how to repair it using the cd. can someone help me with the commands?
AirmanPika
Jan 16, 09:00 PM
OK we know apple supposedly has some kind of super secret planned for the Final Cut meet thats supposed to begin in a few minutes...
Now, I'm going to make my own personal leap of logic here based on rumblings over the last few weeks.
Touch screen tablet, newton 2, multitouch tablet.
Now here we have final cut.
Even though the product isn't exactly geared towards just that I can almost see some kind of Wacom Cintiq apple device. Multitouch gestures, pen input for graphics editing, tablet format. Basicly a handheld multimedia editing platform for pros. Maybe would need to link to a Mac Pro as it won't itself be able to process the graphics of an HD Video or something similarly intensive.
Yea I know my head is in the clouds but it would be a fun toy.
Now, I'm going to make my own personal leap of logic here based on rumblings over the last few weeks.
Touch screen tablet, newton 2, multitouch tablet.
Now here we have final cut.
Even though the product isn't exactly geared towards just that I can almost see some kind of Wacom Cintiq apple device. Multitouch gestures, pen input for graphics editing, tablet format. Basicly a handheld multimedia editing platform for pros. Maybe would need to link to a Mac Pro as it won't itself be able to process the graphics of an HD Video or something similarly intensive.
Yea I know my head is in the clouds but it would be a fun toy.
okwhatev
Jul 11, 08:14 AM
can anyone report from the grove?
johnbro23
Jan 24, 07:37 PM
I've had some problems with my Linksys router. It works about 98% of the time. But that 1% really gets to you... its just stops working sometimes for no good reason. Its the only router I've used, so maybe its a problem with routers accross the board.
wolrabn
May 4, 02:24 PM
still not given up.. though its fading.
i've now tried custom firmware making sure im in pwned dfu mode for 2.2.1 and 3.1.3 using both pwnagetool and sn0wbreeze.
all return error 6.
tried using itunes 7.7 on windows but that cannot connect to software update server...
im pretty certain its not on ipad baseband now. i've added the ecid to tinyumberella but it doesn't see it and 'fix recovery' option fails.
also tried using ireb then sn0wbreeze custom firmware- no joy.
tried pretty much all official firmware.
has anyone seen this sort of error before and it be hardware related?
i've now tried custom firmware making sure im in pwned dfu mode for 2.2.1 and 3.1.3 using both pwnagetool and sn0wbreeze.
all return error 6.
tried using itunes 7.7 on windows but that cannot connect to software update server...
im pretty certain its not on ipad baseband now. i've added the ecid to tinyumberella but it doesn't see it and 'fix recovery' option fails.
also tried using ireb then sn0wbreeze custom firmware- no joy.
tried pretty much all official firmware.
has anyone seen this sort of error before and it be hardware related?
No comments:
Post a Comment