shneady
Apr 7, 03:24 PM
Jeep Wrangler
GMC Sierra
Apple
Panasonic
GAP
Monster Energy Drink
and more than anything, even more than Apple, I am a California, American Made brewery snob. Specifically with the IPA's. It's all about the IPA's and these California homegrown made and owned breweries
Russian River
Stone
Green Flash
Mission
AleSmith
Sierra Nevada
Alpine
Port
Bear Republic
And I'm sure more to come...
GMC Sierra
Apple
Panasonic
GAP
Monster Energy Drink
and more than anything, even more than Apple, I am a California, American Made brewery snob. Specifically with the IPA's. It's all about the IPA's and these California homegrown made and owned breweries
Russian River
Stone
Green Flash
Mission
AleSmith
Sierra Nevada
Alpine
Port
Bear Republic
And I'm sure more to come...
pOLLYpOCKET
Apr 7, 11:26 PM
I would say retina pad.
+1.
Say no to pixels!
+1.
Say no to pixels!
twoodcc
Mar 7, 07:20 PM
Maybe we should create a thread here for that? I know there's some on the actual folding forums but one here may be easier to navigate.
either that, or hopefully someone can post some numbers in this thread to give us something to compare to.
from trying to google, i've found that an i7 920 folds the 6040 units around 12-14 minutes, depending on overclock! this macbook pro isn't far off!
either that, or hopefully someone can post some numbers in this thread to give us something to compare to.
from trying to google, i've found that an i7 920 folds the 6040 units around 12-14 minutes, depending on overclock! this macbook pro isn't far off!
Dont Hurt Me
Dec 11, 08:33 AM
Original Quicksilver had a very poor cooling solution with not much in the way of airflow. The original fan blew out if not mistaken. But that makes little sense in my view. I would have that fan sucking cool air from outside and blowing it across that sink into the system. Even open up a few of those holes on the back with a drill if you must its what i did. The big fan above the hard disc moves air to the outside of the unit. Also i dont know how you feel about this but i have notice manufactors are sloppy and stingy when applying the silicone compound between the cpu & sink. Make sure that CPU is coated 100% before mounting the heat sink. Also Quicksilver came with 2 fan guards on the power supply. One on the unit and one on the case. Remove one of these guards for even better flow of air. For example i had a 1.4 Merc extreme that would run all day at 1.47 after i made these cooling mods. quicksilver for the most part baths the componets in other componets heat and then sends that air across the sink out the system. Reverse that for better cooling. good luck.
more...
G5Unit
Nov 30, 10:05 PM
BTW... Add tax, for whereever most people are and you are most likely paying about $137-$138. I am doing a new one for $120 shipped.
Then make your own thread:D I dont think he will charge tax.
Then make your own thread:D I dont think he will charge tax.
bousozoku
Feb 16, 02:46 PM
I'm using Firefox with adblock right now and it seems to work fine, despite the fact that the page says it's not available for version 1.0+. I changed that to 1.0 and got the version that works.
Also, you might try Shiira. It uses the back-end that Safari and OmniWeb use to render pages and run JavaScript but it has its own distinct look.
Also, you might try Shiira. It uses the back-end that Safari and OmniWeb use to render pages and run JavaScript but it has its own distinct look.
more...
d_and_n5000
Dec 21, 07:53 PM
Maybe you left something, like food, inside, and it is burning because of the heat. I've heard of horror stories at schools that use iBooks, where kids have papers and food instead of AirPort cards-scary. Have you left food in the AirPort slot?
Gr80Likes2Boogi
Apr 30, 11:42 AM
Thanks, guys!
I love the look of the iMac G4, but that's purely aesthetic. It WOULD work for my application, though (just Qlab > Mbox2 > mackie whatever board they have me use that show)
Fortunately, when I sounded the horn on ye olde facebook, a friend offered his G5 tower for free. All I need to do is supply a monitor, and I can definitely Amazon me a cheap flat panel. Probably the best possible scenario! But now of course I just want a G4 to put up iTunes visualizer and never turn it off =)
EDIT: Talked the the guy who is selling the G4 iMac, and we worked out a deal that ends with me getting the iMac- FOR FREE! I work at Disneyland, so I have a pretty hefty bargaining chip... So now my dilemma is solved. 2 computers, no money out of pocket. Interesting how some things work themselves out!
I love the look of the iMac G4, but that's purely aesthetic. It WOULD work for my application, though (just Qlab > Mbox2 > mackie whatever board they have me use that show)
Fortunately, when I sounded the horn on ye olde facebook, a friend offered his G5 tower for free. All I need to do is supply a monitor, and I can definitely Amazon me a cheap flat panel. Probably the best possible scenario! But now of course I just want a G4 to put up iTunes visualizer and never turn it off =)
EDIT: Talked the the guy who is selling the G4 iMac, and we worked out a deal that ends with me getting the iMac- FOR FREE! I work at Disneyland, so I have a pretty hefty bargaining chip... So now my dilemma is solved. 2 computers, no money out of pocket. Interesting how some things work themselves out!
more...
treehorn
Apr 23, 09:34 PM
So H.264 is a very compressed format. That sets off a flag right there. Ideally you wouldn't be provided footage in such a lossy format.
Taking the H.264 footage and converting it to DV NTSC is essentially compressing it again (albeit a lesser compression), but it is still increasing the generation count. Instead, I would try throwing it into compressor and transcoding to apple prores 422. That should hopefully alleviate any loss of quality.
But sadly we don't live in an ideal world :) And this is footage given out for television usage, believe it or not...(do CBS Sunday Morning and the Today Show really like getting footage in compressed h.264?)
I'll try prores 422. My thought was that as the the other footage is DVPro NTSC converting it to DV NTSC would be transcoding to a closely matching format. But it didn't seem to help any...
Taking the H.264 footage and converting it to DV NTSC is essentially compressing it again (albeit a lesser compression), but it is still increasing the generation count. Instead, I would try throwing it into compressor and transcoding to apple prores 422. That should hopefully alleviate any loss of quality.
But sadly we don't live in an ideal world :) And this is footage given out for television usage, believe it or not...(do CBS Sunday Morning and the Today Show really like getting footage in compressed h.264?)
I'll try prores 422. My thought was that as the the other footage is DVPro NTSC converting it to DV NTSC would be transcoding to a closely matching format. But it didn't seem to help any...
GGJstudios
Mar 16, 11:10 AM
Thanks, just what I was looking for.
They keep it hidden! :D
276358
They keep it hidden! :D
276358
more...
nevermindxntrik
Apr 17, 03:15 PM
Thanks!
Shaduu
Jan 15, 07:44 AM
I thought it was at 10am Pacific Standard Time, which would be 6pm here. :confused: Am I totally gone or is it starting at 9am PST? (which would be 5pm here)
edit: FRICK! yeah, ok, 9am PST/ 5pm GMT :o
I'll get my coat.
9am PST so starting at 5pm. :)
edit: FRICK! yeah, ok, 9am PST/ 5pm GMT :o
I'll get my coat.
9am PST so starting at 5pm. :)
more...
![jay khan 2011. [IBES] Jay quot;Shirquot; Khan - Das](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_uFr4rTtur9_70AB2zeQts6Ub3l7XsCkWZ9RMgWpdyRLiPdajMA8ZJppUqrRhje331rqS9yfLJKWLB_8MMA_iy3wH2uoXN9IAL4pm1FTYF3anUyqNXZS8idLkpFh4zA3rvjm5Co5WzXH1VoGC1YYXxajfuf0-n32-yula5TqTSDvHXYJOc_B2TgA5C0SzRUseo2lx_kXfMF_BMc5mHRRC-LwFU3RB-nLLqwCPPuVhIUD8k47TIpTafd3m3PMyBxxN_vfR1UAxx7FpHz8fmdxDboggAJRcc=s0-d "[IBES] Jay quot;Shirquot; Khan - Das")
Blue Velvet
Nov 15, 03:46 PM
I'm also a photoshop wiz...
Photoshop?
Treat yourself: get the iMac G5.
No Mac is fast enough for my Photoshop mis-adventures, even the dual 2.5s at work.
Damn the torpedoes! Speed, more speeeeed...
Photoshop?
Treat yourself: get the iMac G5.
No Mac is fast enough for my Photoshop mis-adventures, even the dual 2.5s at work.
Damn the torpedoes! Speed, more speeeeed...
jdreier
Apr 29, 08:04 PM
I do use smc fan control while i'm encoding. It does a pretty good job. Keeps the temps down around 80C while encoding with fan rpm around 3800.
more...
scem0
Oct 27, 12:14 PM
anything but that monitor. I think that would be a baaaaaaaaaaad move for apple. Unless they could manage to have it be really inexpensive, nobody will buy it. Sure, it is a huge monitor, but is it affordable to the average consumer (probably not :rolleyes: ).
DXoverDY
Dec 20, 08:09 PM
Thanks for the tip. apple's laptop are always such a pain to open up. Changing the hard drive on my toshiba only involved taking out 5 screws.:(
parts of pbfixit.com were good.. but that was the simple stuff.. the hardest part of the whole bit was doing this, and they essentially give you the wrong info. i should've taken pictures, but for anyone who is interested.. oh my 15" powerbook revision C, this holds true.
if you get to the part of having to remove this latch. get a nice dentist poker stick thingie and instead of prying at the case, simply push aside the optical slot protector/dust stoppers on the left side, right at the first little slit going vertically. insert the tip of the dentist thing into the area .. you can see the case and the latch if you look very carefully. put it in between them and gently pull forward while lifting on the top case gently. it comes off very very easily. this will essentially mean you touch ZERO of your case while taking this off. if you go in through the gap as pbfixit.com says, depending on the tool (metal or whatever) it will quickly turn nasty and you'll be ruining your case... if someone would like pictures, i can take them... it won't be real accurate, but i can point out the obvious parts. maybe i'll even put a guide together for it to help people..
going to take photos now. be back shortly with pics.
EDIT: they're very hard to take, due to the small area i'm trying to capture. i'm going to try more later.. but i'll post back here when i get better pics.
parts of pbfixit.com were good.. but that was the simple stuff.. the hardest part of the whole bit was doing this, and they essentially give you the wrong info. i should've taken pictures, but for anyone who is interested.. oh my 15" powerbook revision C, this holds true.
if you get to the part of having to remove this latch. get a nice dentist poker stick thingie and instead of prying at the case, simply push aside the optical slot protector/dust stoppers on the left side, right at the first little slit going vertically. insert the tip of the dentist thing into the area .. you can see the case and the latch if you look very carefully. put it in between them and gently pull forward while lifting on the top case gently. it comes off very very easily. this will essentially mean you touch ZERO of your case while taking this off. if you go in through the gap as pbfixit.com says, depending on the tool (metal or whatever) it will quickly turn nasty and you'll be ruining your case... if someone would like pictures, i can take them... it won't be real accurate, but i can point out the obvious parts. maybe i'll even put a guide together for it to help people..
going to take photos now. be back shortly with pics.
EDIT: they're very hard to take, due to the small area i'm trying to capture. i'm going to try more later.. but i'll post back here when i get better pics.
more...
scirica
May 5, 02:31 PM
I just removed AdSheet from my iP4 via SSH and ended this annoyance once and for all. No ill effects whatsoever. I was getting the same result when I ran Accuweather, another app that runs iAds. Not any more!!
TheSlush
Aug 12, 09:38 AM
Hmm... an Apple website replaced by a section on iTunes... this is obviously proof that Apple intends to pull the entire World Wide Web into iTunes and create a walled garden where the entire internet is controlled by THEM, MUHAHAHA!
maclaptop
Apr 9, 04:15 PM
The power support screen protectors seem to cover edge to edge.
There is a tiny raised lip on the edge of the iphone 4 screen, the power support seems to fit right up to it.
Thank you for your fast response, I'm eager to get my phone protected. What you've described sounds just like what I'm looking for.
Cheers :)
There is a tiny raised lip on the edge of the iphone 4 screen, the power support seems to fit right up to it.
Thank you for your fast response, I'm eager to get my phone protected. What you've described sounds just like what I'm looking for.
Cheers :)
antnie
May 7, 01:02 AM
4.3.3 untethered jailbreak! This is the way I did it for my iphone.
http://www.youtube.com/watch?v=xeahEx3NIzk
http://www.youtube.com/watch?v=xeahEx3NIzk
Sir_Giggles
Jan 12, 10:24 AM
Well Soundtrack is being bundled with FCPexpress, which makes more sense to me, since Soundtrack was hardly embraced by the pro community, to the aspersions of Logic and BIAS.
Zaid
Sep 28, 06:11 PM
Sounds good :).
If only I had easy access to London.
_Emerson
Open offer mate. I'll even through in the sleeper couch in my living room
If only I had easy access to London.
_Emerson
Open offer mate. I'll even through in the sleeper couch in my living room
cube
Sep 21, 06:29 AM
If you want silent, I would look at the Samsung SpinPoint P120, but it's not in the reliability database either. I have a P80 in my Cube and I am happy with it.
-Ken-
Apr 27, 11:43 PM
Strange. SL works on all my stuff without ever crashing, including my Hackintosh.
Have you ever tried a clean reinstall?
Have you ever tried a clean reinstall?
No comments:
Post a Comment